David Clark Headset H10-13H, U174
Coiled cord
Watch this product and we will notify you once it is back in stock.
David Clark Headset H10-13H, U174
Coiled cord
Features:
- Expanded, super-soft, double foam head pad
- Larger, yet lighter, Comfort Gel, undercut ear seals
- Reduced headband force
- Universal flex boom for perfect microphone placement
- Exclusive M-7A, the most advanced noise-cancelling microphone available
- Low-profile volume control knob with detent settings
- Molded cord assembly made to exceptional pull and flex standards
- 5-foot extended coil cord
- FAA TSO Approved C57b, C58a
- Exceeds RTCA/DO-214 Standards
- Weight (without cord assembly): 16.5 oz.
- Certified Noise Reduction Rating - 23 dB
- 5 year warranty
Specs:
- Ear coupling: around-the-ear
- Hardware: steel
- Connector type: U174/U
- Connection cable: approx. 5 ft. (1,5m) coil cord
- Weight w/o cable: approx. 16.5 oz. (488 g)
- Dome type: ABS
- Characteristic SPL: approx. 95 dB SPL (1 kHz, 1 mW) @ maximum volume nominal
- Contact pressure: approx. 0.6 lb. (2.7 N)
- Total harmonic distortion (THD): < 1% - 110 dB SPL (300 - 3,000 Hz)
- Transducer principle: Dynamic
- Ear Impedance: 150 ohm (300 each; wired in parallel)
- Ear Freq Response: 200 – 5,500 Hz
- Microphone principle: M-7A Amplified Electret
- Mic Impedance: 50 ohm +/- 20 %
- Mic Sensitivity: 400 mV +/- 6 dB into 150 ohm load at 1kHz for 114 dB SPL input
- Mic Frequency Response: 300Hz – 3.5KHz per RTCA DO 214
- Mic DC Supply Voltage: 8-16 V, not polarity sensitive
- Source Resistance: 470 ohm